Asselin Industriel

Our products

Commercials and industrials

Alumatite

  • Porte : aluminium
  • Couleur : blanc, aluminium, autres couleurs disponibles
  • Dimension : maximun 16 pour panoramique complet
  • Épaisseur : 45mm
  • Vitres : différent types disponible

D1200

  • Isolation : R-8.
  • Type isolation : polystyrène
  • Porte : acier galvanisé de jauge 26
  • Finition : grain de bois rainuré
  • Dimension : maximun 18′
  • Épaisseur : 45mm (environ 1 3/4″)

D1400

  • Isolation : R-17.09.
  • Type isolation : polyuréthane sans CFC
  • Porte : acier galvanisé de jauge 26
  • Finition : grain de bois rainuré
  • Dimension : maximun 18′
  • Épaisseur : 45mm (environ 1 3/4″)

D1600

  • Isolation : R-17.09.
  • Type isolation : polyuréthane sans CFC
  • Porte : aluminium de jauge 23
  • Finition : grain de bois rainuré
  • Dimension : maximun 18′
  • Épaisseur : 46mm (environ 1 13/16″)

Serie 350

  • Type GP200
  • Isolation : R-18.
  • Type isolation : polyuréthane sans CFC
  • Porte : acier galvanisé de jauge 25
  • Finition : intérieure et extérieure, imitation stucco avec légères nervures
  • Dimension : maximun 18′
  • Épaisseur : 2″

Serie 600/ Serie 700/ Panoramique

  • Porte : aluminium de jauge 23
  • Couleur : blanc ou aluminium
  • Dimension : maximun 16 pour panoramique complet
  • Épaisseur : 46mm (environ 1.82)
  • Vitres : différent types disponible
  • Options : Panneau à l’épreuve des coups de pieds

Series 500

This heavy duty door is ideal for small to medium sized industrial applications that require high reliability, strength and quality of insulation. The door is covered with 16 gauge at minimum but can go up to 1/8’’ thick steel for the inside as well as the outside. The thermal insulation is anywhere from 2’’ to 4’’ thick. The rating will vary from R10 at 2’’ up to R16 at 4’’.

Thermatite MR T150

  • Isolation : R-14.2
  • Type isolation : polyuréthane sans CFC
  • Porte : acier galvanisé
  • Finition : multi-rainurés
  • Couleurs : blanc standard, en option : brun, argent
  • Dimension : maximun 20′-2″
  • Épaisseur : 1 1/2″

Thermatite MR T175

  • Isolation : R-16.4
  • Type isolation : polyuréthane sans CFC
  • Porte : acier galvanisé
  • Finition : multi-rainurés
  • Couleurs : blanc standard, en option : brun, argent
  • Dimension : maximun 36′-2″
  • Épaisseur : 1 3/4″

Fast

Bantam

Indoor and outdoor use door

Economic door, ideal for opening moderate as for docks applications. This gate function in manual way, it requires can maintenance and has a resistance to impacts.

motorized opening

up to 10′ wide X 10′ high

Series 450 – Rapid Door

In addition to contoured side columns, this door offers a tighter seal on all sides and an advanced wireless safety system. It is durable and can take a hit. It offers high performance for interior and exterior applications where speed, low maintenance and dependability are critical. Plus, a one-year warranty makes it the best value in the business.

FabriCoil

With a good number of the desired characteristics typical of the gates at high speed, the base FabriCoil doors offer excellent durability and reliability at an affordable price.

Pharma-Roll

Indoor use door

This door meets the highest standards of the pharmaceutical industry, it allows a complete cleaning of lateral recoveries as well as rail from the bottom, by a system without a tool. Is ideal for applications of high f-number. Can this gate function of way motorized, it requires maintenance and impact resistance. Offers great visibility, so reduces the risks of incident.

Available stainless steel component.

up to 12′ wide X 14′ high

Plexline

Indoor use door

This door of manufacturing with composite materials offers resistance to impacts. It offers increased security with its reversible pneumatic system with photocell, it also allows a complete cleaning. Is ideal for applications in number of opening high as for example in the areas of PSUs, pharmaceutical and chemical warehouse. This door function of way motorized, it requires can maintenance.

Braking system to against weight.

up to 16′ wide X 16′ high

Series 640 – Rapid Rolling Rubber Door

This rubber rolling rapid door is designed with windbars and can withstand wind charges of up to 8.8 psi (57.5 mph). The door is equipped with two angles and an EPDM rubber 5’’ loop weather-stripping soft bottom beneath that provides near-perfect sealing and insulation. The rubber roll is black colored and made of high quality SBR 70 type rubber. It is also highly fire retardant. Moreover, the rapid door is rated for use in temperatures of -40F to 180F and 1,000,000 cycles.

Spiral

Indoor and outdoor use door

This manufacture of anodized aluminium roll-up door offers high resistance to corrosion and helps keep the places secured by its rigidity. Is ideal for applications of high f-number come in commercial, institutional and industrial settings. This door function of way motorized, it requires can maintenance. Offers a manual opening by a spring system (system manual egress).

Available with latte glazed door to allow increased visibility. Door with insulated latte available offers greater resistance to the wind. Is also available with an opening for low ceiling.

up to 26′-2 ‘ wide X 22’-11 “tall

Turbo-Seal

Indoor door

Is ideal for applications of high f-stop until 100 “/ SEC where the opening and closing speed is important come in commercial, industrial circles such cold places. This door function of way motorized, it requires can maintenance. Offers a manual opening by a system of against weight (system manual egress). Door that can withstand great impact and may be reinserted in its tracks without tool. Door with a small profile therefore installation in limited space.

Is available with glass section, also available with galvanized steel covers

up to 22′ wide X 16′ high

Fire doors

Serie 1001 / FireCoil

  • Quand sécurité et protection contre le feu sont primordiales, la porte FireCoil est le bon choix. FireCoil est le standard pour les entreprises qui ont besoin d’une porte coupe-feu.

Total Door

Total Door

  • Ces portes piétonnes sont très utilisées pour toutes applications du code de bâtiment avec les normes à feux UL.
  • Ces portes sont fabriquées avec une très belle finition.
  • Ces portes sont retenues avec des aimants au mur et lors du déclanchement du système de feux  les portes ce referment par elle-même avec un cylindre approprier et approuver par UL.

Grillage

DuraGrille

This door provides protection against theft and vandalism, with a contemporary look. When safety and visibility are key considerations, choose a screen door DuraGrille. Available in two models, either the right or the brick model, these two models offer a view without obstructions of the goods.

Rolling steel doors

1001 FT Series

Is a standard rolling door.

It applies to several operations like warehouses, shipping and receiving doors to separate 2 buildings or other wall firewalls applications.

It can be operated manually and automatically.

It can be installed with case trigger automatic or electronic or mechanical fuse link.

Series 1000

This product provides reliability and durability to match or exceed the requirements for everyday use. Offered with our wide selection of features and options, this model is best suited for most of the service door.

1002 / Dura Shutter Series

Designed for a variety of common applications, DuraShutter equals or exceeds the requirements for everyday use. Available with the largest selection of features and options.

1300 / DuraGrille Series

This gate is used to secure an opening. Rolling steel door netting that can be used to store closure to secure an entry without blocking the air inlet. This door little be operated manually or automatically.

Series 3000 – Insulated steel curtain

The metallic curtain is made of insulated steel blades in galvanized steel Z 275 of 18-gauge (1.31mm) embedded into each other. The height of every blade is 3’’. The extremities stoppers on each alternative blade are made of malleable cast iron and allows engagement and locking of the curtain in its place in the guide rails. The bottom bar is an extruded aluminium profile and comprises a U-shaped Santoprene weather-stripping rated for extreme cold. Finally, the bottom blade is made of two angles 38mm x 38mm x 3mm at minimum.

Follow Us

Asselin Industriel

1660 Cité des Jeunes
Les Cèdres, Qc, J7T 1K9

450 200-0633

Other subsidiary:

www.portesdorion.com